*IMPORTANT - Contact connect@icomamerica.com and ask about the LTE Airtime Pricing required for this product.
**IMPORTANT - Contact connect@icomamerica.com and ask about available options for this product.
---------------------------------------------
Icom’s IP730D* is a revolutionary hybrid radio. With dual PTT buttons, the IP730D transmits and receives LTE, IDAS, and analog networks to create nationwide coverage. The IP730D offers flexibility and assurance. Wherever coverage is needed, the IP730D is ready.
Channels: | 128 channels | |
Output Power: | 5W | |
Frequencies: | 136-174, 400-512 | |
Network: | 3G and 4G | |
Digital Conventional: | IDAS™ built-in | |
Programmable keys: | 3 | |
Waterproof Rating: | IP67 |
Dual PTT
The main PTT button is larger and sits above the slightly smaller sub PTT button. Program either PTT button as LTE or IDAS/analog. Two more programmable button sit below the secondary PTT button.
Dual Receive
Receive IDAS, analog, and LTE signals at the same time. Prioritize between LTE or IDAS/analog calls by selectively raising the volume. Always stay up to date on both channels.
Bridge Mode
Connect to another site’s IDAS™ or LTE conversations with Bridge Mode. Bridge Mode links IDAS and LTE transmissions together, allowing LTE transmissions to go over LTE talkpaths or vice versa. Bridge mode does not work with the analog function.
LTE Mode
Talk on full-duplex communications, ideal for telephone-style conversations. Transmit and receive at the same time. With Priority Interrupt Calling, break into ongoing conversations to relay important messages. The built-in GPS receiver can transmit position data at intervals to RDT Live or RDT Pro.
IDAS™ Mode
IDAS mode allows interoperation with existing IDAS™ NXDN™ systems while still using LTE. When LTE communications unexpectedly go down, benefit from having a dedicated IDAS/analog system as a backup communication resource.
- Over-the-air-programming (OTAP), update radio functions over LTE signals
- Individual, group, and all calls
- 15-bit encryption digital voice scrambler
Emergency Features
Emergency and safety features such as Man Down, Lone Worker, and Motion/Stationary/detection are standard along with the emergency button on top of the radio. If any of these functions are used, the signal is relayed to a controller or dispatcher via IDAS or LTE signals.
Other Features
- Record and playback up to 4 minutes or a max of 10 messages
- Vibration alert function
- Surveillance function
- AquaQuake™
- DTMF code transmission with optional DTMF microphone, HM-245T
- 500 memory ID address book
* The UHF IP740D has not been approved or certified by the Federal Communications Commission, AT&T, and the PTCRB. This device may not be sold or leased, or be offered for sale or lease until approval and certification of the FCC, AT&T, and PTCRB have been obtained.
IP730D
Frequencies
Channels
Network
4G bands
3G bands
136-174, 400-512
128
LTE B2, B4, B12,
W-CDMA B2, B5
Dimensions (wxhxd) 140.5 × 61.7 × 42.8 mm,
5.5 × 2.4 × 1.7 in (with BP-303)
Weight 320g, 11.3 oz (with BP-303) Voice Codec G.726 (32 kbps) AF output power
Internal SP
External SP
HM-222H
1500 mW typical (8Ω load, 10% distortion)
1000 mW typical (8Ω load, 10% distortion)
1500 mW typical (8Ω load, 10% distortion)
Operating time* (5:5:90 duty cycle.) Up to 24 hours with LTE functions (with BP-303)
Up to 13 hours of Land Mobile functions (with BP-303)
Bluetooth Version: 4.2, Output: Class 2, Protocol: HFP, HSP GPS Built-in Operating temperature -30 °C to +60 °C,
-22 °F to +140 °F
IP rating IP67 *Operating time may differ depending on operating environments. All stated specifications are subject to change without notice or obligation.
All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military SpecificationsIcom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.
MIL 810 G Standard Method Proc Low Pressure 500.5 I, II High Temp. 501.5 I, II Low Temp. 502.5 I, II Temp. Shock 503.5 I-C Solar Radiation 505.5 I Rain Blowing/Drip 506.5 I, III Humidity 507.5 II Salt Fog 509.5 – Dust Blowing 510.5 I Immersion 512.5 I Vibration 514.6 I Shock
516.6 I, IV
Also meets equivalent MIL-STD-810-C, -D, -E and -F.Ingress Protection Standard Dust & Water IP67 (Dust-tight and waterproof) Supplied Accessories
- BP-303 battery pack
- MB-133 belt clip